Our website uses cookies. By continuing to browse our site you are agreeing to our Cookie Policy.
Back To Top
Yarway Narvik HT- Templow Probe Style, High Temperature
Narvik HT- Templow Probe Style, High Temperature
Yarway Narvik HT- Templow Probe Style, High Temperature
The TempLowHT utilizes the fundamental design concepts of the standard Templow, designed for temperatures up to 621°C.
The TempLowHT is designed to eliminate sliding trim parts in the hot zone
Yarway Narvik HT- Templow Probe Style, High Temperature

Specs

Critical Service
Steam Condition
Flow Characteristics
Special Characterization, Modified Equal Percentage, Linear, Equal percentage
Material
Alloy
Operating Temperature
High Temperature
Pressure Class
PN, ASME
Shutoff Class
Class V (FCI 70-2)
Valve Size
NPS 1-1/2 / DN 40, NPS 1 / DN 25, NPS 2 / DN 50, NPS 3 / DN 80, NPS 6 / DN 150, NPS 4 / DN 100
Valve Size Standard
NPS, DN
Valve Type
Angle Valve

Features

  • Installation in straight, vertical or horizontal pipe.
  • Minimal headroom is required for mounting
  • Standard connections to ASME B16.5
  • Rapid evaporation of water is achieved to minimize the accumulation of water in the line.
  • Control within 10°F (6°C) of saturation is possible.
  • Water turndown capacity of 50:1 (typically) or higher is available.
  • Forged body with, stainless steel internals eliminates corrosion and vibration issues.
  • Inconel 718 nozzles minimize wear.
  • Replaceable Stellite® or 17% Cr seat for long life tight shut-off.
  • Long trim life. Pressure drop is taken across the nozzles rather than the seating surfaces.
  • Injection probe unscrews from body for easy capacity changes without changing stem/disc or seat.
  • Actual performance depends on the application and in many instances may exceed the design characteristics above.